Toggle menu
41
152
1
785
cornish semiconductor corporation
Toggle preferences menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Low temperature alloys: Difference between revisions

From cornish semiconductor corporation
No edit summary
No edit summary
Line 4: Line 4:
Mounting natural crystals to form an 'ohmic' (normal) connection while holding them securely to allow a cat's whisker to be positioned is a tricky problem. In the past they were either held by a metal ring with screws (which can be problematic as it can break the fragile crystals) or using a conductive low temperature alloy.
Mounting natural crystals to form an 'ohmic' (normal) connection while holding them securely to allow a cat's whisker to be positioned is a tricky problem. In the past they were either held by a metal ring with screws (which can be problematic as it can break the fragile crystals) or using a conductive low temperature alloy.


The reason it needs to be low temperature is because heating them too high - e.g. soldering them normally, can cause changes to the crystals. I tried dipping pyrite in solder to mount it in the past (in a well ventilated place!), and seemed to work at first, but seemed to slowly crumble away over time.
The reason it needs to be low temperature is because heating them too high - e.g. soldering them normally, can cause changes to the crystals. I tried dipping pyrite in molten solder to mount it in the past to see what happens (in a well ventilated place!), and seemed to work at first, but slowly crumbled away over time.

Revision as of 21:44, 18 October 2026

Mounting natural crystals to form an 'ohmic' (normal) connection while holding them securely to allow a cat's whisker to be positioned is a tricky problem. In the past they were either held by a metal ring with screws (which can be problematic as it can break the fragile crystals) or using a conductive low temperature alloy.

The reason it needs to be low temperature is because heating them too high - e.g. soldering them normally, can cause changes to the crystals. I tried dipping pyrite in molten solder to mount it in the past to see what happens (in a well ventilated place!), and seemed to work at first, but slowly crumbled away over time.